Paper feeding process of window patching machine—Anhui Hongyonghua Machinery

The automatic window sticking machine is mainly suitable for all kinds of window-opening gift boxes, cosmetic boxes, tissue boxes, window corrugated boxes, etc. Glue on the runner to ensure uniform gluing and effective control of the amount of glue. When you stop working, the rubber roller and the rubber transfer roller are prone to adhesive bonding, which affects the use, so how to avoid this situation?

When the window pasting machine chooses two paper pushers on the conveyor chain to push the paper products together, or when the two paper pushers need to be in sequence, loosen the screws on the sprocket and use your hand to move the automatic window The sprocket with the empty sleeve of the machine chain at the moment rotates idly on the driving shaft, and the push paper stop gauge on the chain-moving chain can move back and forth, so that the stop gauge is adjusted to the proper position that is about to be pushed to the paper jam and then the screw is locked.
Release the two star-shaped handles and roll the two handles on the side of the wall panel together on the two inner sides. The window patching machine can make the gap between the glue roller and the glue roller, the handle rolls up, the gap between the two rubber rollers is small, and the glue is applied. The amount is small, the handle is rolled down, the amount of glue is small, and the handle is rolled down, the amount of glue is large, after adjusting the appropriate amount of glue, then tighten the handle screw.

The paper products are conveyed by the eleven flat belts with holes of the active window sticking machine. The suction pump generates negative pressure to absorb the jammed paper through the small holes on the flat belt. On the conveyor belt, keep the jammed paper in the correct position and enter the glued part.

The glue roller transfers the glue to the glue transfer roller, and then the glue transfer roller applies the solution to the format glue strip. When the paper product is conveyed to the plate roller for gluing, the two electromagnetic suctions in the wall panel are placed The iron and the moving lever force the pressure line cutting corner window pasting machine of the suction paper feeding table to rise, and the glue on the rubber strip is accurately applied to the window part of the paper product through the roller.

Paper feeding process of window patching machine

After the paper feeding of the window sticking machine and automatic window sticking machine, the paper products that need to be pasted after die-cutting and indentation are arranged and organized, and they are stacked on the paper feeding table with the supporting feet inclined. A piece of paper is pulled out and separated from the paper pile. Following the rolling of the paper feed belt, the paper product enters the paper feeding device after passing between the paper feed belt and the pressure roller.

After the paper products enter the paper feeding device through the paper feeding belt through the automatic aligning window pasting machine, the paper products are transported forward by the rear end of the paper products by the paper pusher on the chain, along the adjusted distance The guide equipment of the upper and lower guide rails and left and right guide rails of the window patching machine are sent to the vacuum conveyor belt of the gluing equipment. Because of the changes in the specifications of the processed paper products and the different window orientations, necessary adjustments must be made to the paper transport orientation.
Adjust the paper feeding direction of the window patcher. Select the paper feeding belt position according to the shape of the processed paper, loosen the tension wheel of the paper feeding belt, move the paper feeding belt to the required position and fix Anqing Yonghua Machinery. Loosen the star handle on the roller frame, move the paper pressing roller on the roller frame to align the conveying wheel with the paper pressing roller, and then tighten the star handle.

Adjusting the direction of paper transportation. When the filmed paper products are pushed together by the paper pusher on the two transport chains, or when the two paper pushers need to be in sequence, loosen the screws on the sprocket of the window pasting machine and use your hand Pull the sprocket that is in the empty sleeve of the chain to rotate idly on the driving shaft, which can drive the paper-pushing block on the chain to move back and forth, so that the block is adjusted to the proper position that is about to be pushed to the jammed paper and then the screw is locked.

To learn more about Anhui Hongyonghua Packaging Machinery Automatic Window Patching Machine, please leave a message for consultation