Conditions to ensure the long-term normal use of the automatic window patching machine—Anhui Hongyonghua Machinery

As one of the important methods of post-press processing of packaging boxes, it is widely used in the packaging of food, medicine and light industrial products. Anhui Hongyonghua's mechanical window-sticking technology is mainly used for packaging of paper boxes, gift boxes, etc., to make the products visible in the display.

At present, the applicability of international window sticking machines is not high, and different types of color boxes have certain limitations in the production process. Traditional window patching machines are mostly based on "two-fold hook bottom" and "four-fold hook bottom". Products that can usually be used for side stickers, side stickers and bottom stickers on both sides are completely unsuitable for changing color boxes. Production. With the improvement of people's living standards, packaged goods are also rapidly updated, especially the versatility of IT packaged goods. As a manufacturer of window sticking machines, we must keep up with the needs of shopping malls and try our best to meet the volatile market, so that the color box window sticking machine can enter the actual production well, so that products with special standards can be guaranteed under the premise of quality and accuracy. , Lost under the same equipment, can not be handled well, bring economic benefits to the company.
Conditions to ensure the long-term normal use of the automatic window patching machine

Frequently check whether the operating parts of the automatic window sticking machine can work normally, whether the temperature rise of each rolling bearing and sliding bearing exceeds the specified value, whether the working temperature of each motor exceeds the specified value, and whether the elastic length of the transmission belt and the conveyor belt is appropriate. If the automatic window sticking machine is abnormal, it needs to be shut down for maintenance.

Before the automatic window sticking machine starts (shift or work interruption), the main parts of the machine should be checked, and the machine can be started after a manual rotation. The machine must be cleaned every shift, the running parts should be kept clean, and the electrical equipment should be kept clean to prevent oil Water and dust enter and prevent the wires from being crushed or broken.
The active drive chain of the automatic window patching machine has 40# oil every 200 hours, and the machine must be cleaned every day. All operating parts should be kept clean, and the nylon discs on both sides of the filming roller and rupturing roller should be regularly lubricated.

Keeping the inside and outside of the machine clean is the basic condition to ensure the long-term normal and efficient production of the machine. Therefore, it is necessary to frequently and thoroughly remove foreign matter, dirt and deposits on the surface and inside of the machine, and to maintain the machine carefully on time. When the fuse is blown, the fuse of the same capacity and specification should be replaced. It is strictly forbidden to increase the specification, and replace it with a non-fuse material such as copper wire. Automatic aligning and cutting corner window sticking machine

When the machine is stopped when it is suspended, the unpainted exposed surface of the machine needs to be protected against corrosion with lubricating oil. When it needs to be used, a wrung out gasoline cloth will be used to remove grease stains. If any abnormality is found in the fan or vacuum pump, the air filter of the fan should be cleaned in time, and whether the connection of each interface is reliable.

To learn more about Anhui Hongyonghua Packaging Machinery Automatic Window Patching Machine, please leave a message for consultation.